RUBI FORAGRES Diamond Core Bit 50 mm (Ref. 04973)

The FORAGRES diamond core bit with a diameter of 50 mm from RUBI is suitable for drilling into stoneware tiles, porcelain tiles, granite, and marble, which require professional core bits. The drilling depth is 30 mm. It has a significantly longer lifespan compared to Easygres core bits. Improper handling greatly reduces the core bit’s lifespan. Water cooling is necessary. The core bit is laser welded. For drilling, only a standard drill or cordless drill without percussion is needed. On average, the bit can drill about 60 holes. The maximum recommended rotation speed for the FORAGRES bit is 900 rpm. Using a guide tool is recommended for precise drilling.

The package contains a drill bit with a diameter of 50 mm.

CAUTION – Drilling into substrates (adhesives, concrete, brick, etc.) causes significant wear on the drill bit and drastically reduces its service life! It is best to use this drill bit to pierce through hard wall or floor tiles and then continue with a carbide drill bit—but without the hammer action! This way, you’ll save on the cost of diamond drill bits and increase your work speed.