The 35 mm diameter FORAGRES diamond bit from RUBI is designed for drilling holes in hard materials such as stoneware tiles, porcelain tiles, granite and marble. The drilling depth is 30 mm. The service life of Foragres drill bits is three times longer than that of Easygres bits and depends on the handling and hardness of the material. Necessary to use water cooling. For drilling you only need an ordinary drill or a cordless drill without a tap. The drill can drill an average of 60 holes. The maximum speed for using the FORAGRES drill is 900 rpm.

The package contains a drill bit with a diameter of 35 mm.

Order number: 04972.

ATTENTION – when drilling into the substrate (glue, concrete, brick, etc.), the drill bit is subject to significant wear and the service life decreases significantly! It is best to use this drill bit to drill through hard tiling or tiles and then continue with the vidi drill bit – but without a tap! In this way, you save the cost of diamond drill bits and increase the speed of work.

Video: