RUBI FORAGRES Diamond Core Bit 120 mm (Ref. 04977)

The FORAGRES diamond core bit with a diameter of 120 mm from RUBI is designed for drilling holes in various high-hardness materials. Wet drilling or drilling with water cooling is recommended. The drilling depth is 33 mm. The service life of Foragres drill bits is three times longer than that of Easygres drill bits, but it depends on handling and the hardness of the material. The core bit is laser-welded, ensuring its rigidity. All you need for drilling is a standard drill or a cordless drill without a hammer action. The drill bit can drill an average of 60 holes. The maximum speed for using the FORAGRES drill bit is 450 rpm.

The package includes a diamond core bit with a diameter of 120 mm.

CAUTION – Drilling into substrates (adhesives, concrete, brick, etc.) causes significant wear on the drill bit and drastically reduces its service life! It is best to use this drill bit to pierce through hard wall or floor tiles and then continue with a carbide drill bit—but without the hammer action! This way, you’ll save on the cost of diamond drill bits and increase your work speed.