The 40 mm diameter FORAGRES diamond bit from RUBI is designed to simplify drilling holes in hard materials. Drilling into stoneware tiles, porcelain tiles, granite and marble requires professional drill bits that drill a precise hole without damaging the material. The drilling depth is 30 mm. The service life of Foragres drill bits is three times longer than that of Easygres bits and depends on the handling and hardness of the material. The life of the crown is considerably reduced by rough handling. Necessary to use water cooling. The crown is laser welded. For drilling you only need an ordinary drill or a cordless drill without a tap. The drill can drill an average of 60 holes. The maximum speed for using the FORAGRES drill is 900 rpm.

The package contains a drill bit with a diameter of 40 mm.

Order Number: 04963.

ATTENTION – when drilling into the substrate (glue, concrete, brick, etc.), the drill bit is subject to significant wear and the service life decreases significantly! It is best to use this drill bit to drill through hard tiling or tiles and then continue with the vidi drill bit – but without a tap! In this way, you save the cost of diamond drill bits and increase the speed of work.

Video: